Chosen Solution
So I have this Mac and it’s working kind of. I have noticed that with the LCD connected it won’t boot at all. However with the screen disconnected and using a separate display it boots and works is this an LCD flex issue or panel issues? Or could this be something else ? Any advice is hugely helpful.
Well, it does look like the logic board connector got a bit of a tug as the detent tabs are bent as such the connector might not be making good contact with the cable. I would press the tabs back down with the cable in place so you don’t go to far as the shell metal is very soft and can break off. I would also slide a spudger across the connector pressing the shell inwards a bit without the cable connected. Trying to add a bit more tension on to the cable. It doesn’t take much to fix so don’t go to far. Otherwise its time for a new connector.
