Chosen Solution
I am replacing the power supply in my Envy and don’t see where to connect the two small wires that are connected to small switches from the top of the computer case. They were cable tied to the power supply and I didn’t see where they were connected when I removed the other wires. They have unusual terminals on the wire ends. Both wires are very small and black. I can send pictures if necessary.
jorvik22. I have the exact same system and the two wires you are referring to are the ANT-1 & ANT-2 that go from the mounts at the top of the case to the embedded wireless WiFi adapter card installed on your motherboard. The small connections go to this card and are very difficult to put on and can easily be broken. I know as this happened to me when I was upgrading my graphics card from and Nvidia 745 to at 1050 TI. I broke one of the antenna connections and these cables are no longer available so I’ve resorted to using a USB WiFi Device to connect to my Hotspot and the internet. My recommendation is to have a PC technician, with the proper tools, to reinstall them onto the card. You did not say if the other ends up in the top of the case were still connected if so you will ok if not, you may need to do what I did or get a PCIe 1X WiFi card with an antenna that pokes out the back of the PC case. Hope this helps. R, Bartef
