Chosen Solution I have a XS Max that had cracked display. Display was cracked on the top so that is blocked the projector in the right part of the notch. Crack was right in the middle of the sensor yellow thing. I installed new display yesterday and carefully made sure every part of the assembly inside the phone is not broken and moved the sensor part form old display to the new one....
Chosen Solution My computer installed or updated lenovo and it rebooted the computer and I accidentally unplugged it idk it that was the problem but now it when i unplug the charger it wont even light up or anything but when i plug it in the keyboard flashes and the lenovo startup screen turns on for maybe 2 or 3 seconds the goes black and the power button and esc button stay on thats it nothing else unless i hold the power button for 10 seconds then the screen cuts on for m2 second goes black the keyboard lights up then nothing again...
Chosen Solution My grandson’s 3ds will not charge. It isn’t the cord and we’re thinking the problem is with the charging port. We have to kind of prop the cord when it’s plugged in so the cord will stay in place. How can we fix this? Juanita, My suggestion in this order: Try with a new battery Check fuses, if in short it will not charge Check power supply connector. Re-solder or replace if required....
Chosen Solution your iphone 5s could not be activated because the activation server cannot be reached. try connecting your iphone to itunes to activate it, or try again in a couple of minutes itunes not connectad Try using 3UTools and see if you can get it activated through there. Also check if IMEI is being displayed there. If IMEI is shown as N/A then the phone has a board issue relating to the baseband circuit which can only be fixed via micro-soldering / board-level repair....
Chosen Solution This is a device that I received for free due to the fact that it would not turn on. After further troubleshooting and testing I soon realized that it was water damaged. I’ve cleaned the board and components, replaced the magsafe board, replaced the LED indicator (it was too far gone), replaced the battery, and I picked up an aftermarket 65 Watt charger because one didn’t come with the device....
Chosen Solution So I turned my Lenovo T420 ThinkPad off and when I tried to switch it on it went directly to the Boot Menu. I have tried all the options that it provides, but once I select an option it jumps back to Boot Menu. I even tried escaping. Nothing worked, then I tried going to the BIOS Setup Menu, which it allowed me to, but changing the settings there didn’t help anything....
Chosen Solution I’ve plugged in my minidrone to the power adapter but the LED that is supposed to indicate charging remains off. I recently had to remove the battery to replace it so I don’t know if I reinstalled it incorrectly. Any help here would be much appreciated. Hi Jacob, Sounds like a frustrating problem you’re having! First off, you should make sure your battery is installed correctly. The triangle printed on the battery should be facing up and the battery should be inserted in the direction the arrow is pointing....
Chosen Solution All the food is going bad quicker because the refrigerator isn’t staying at the ideal temperature. Check the thermostat on the inside of the refrigerator, sometimes the thermostat can burn out and could be in need of replacement. This is usually the main cause of refrigerators not maintaining a cold temperature. If this does not help, please refer to our troubleshooting page linked below. Frigidaire FFPE45B2QM Troubleshooting
Chosen Solution Samsung front loader dryer MODEL#DV42H5200EW/A3..WILL START THEN TURN OFF BOUT 30 SEC Hi, Here’s an image taken from the tech sheet for the dryer, which may help to locate the problem. If it is not one of the causes listed then hopefully the tech sheet may be of further help as it explains how to test some functions in the dryer to make sure it is installed properly, also how to display stored error codes (if any) and their meaning etc....
Chosen Solution It won’t connect to wifi. What can I do?? Hello, This problem could be caused by a broken connection or just a damaged tablet. With some tablets it would cost more to fix the tablet then purchasing a new one. This fix will need you to have some background in soldering. Also, this may not even be a hardware problem. What is it showing or saying on the screen when you try to connect....
Chosen Solution When I was using my camera, it turned off while I was trying to take a picture. I have tried to turn my camera on several times. When I push the power button, the camera does not respond and the screen stays black. What should I do? The camera’s battery might be dead. Try charging your battery. You can do this by plugging the charger cable into the bottom of the camera....
Chosen Solution I can’t get my sim card tray to fully insert into my phone. Does anyone know the cause of this or how I can fix this problem? Usually damaged pins from the Sim card reader or broken plastic from the Sim tray causes this problem. Have you tried a replacement Sim tray just in case? If Sim needs to be replaced the phone would need to be opened up and the tray replaced by someone that does micro-soldering....
Chosen Solution My 3ds Xl will not charge. The charging light comes on but the battery does not charge. I have checked the fuses and they are good. First try a new adapter . My son had 2 Adapters that went bad and this same issue happened. Next i would replace the battery. If this doesn’t solve the issue then your looking at a problem with the charging circuit. For my problem are the same also,, it only can play while in AC but not in battery ....
Chosen Solution phone goes to metro pc screen and sits there and will not shout down unless i take out battery YOU need do thermal or physically function on your cpu and memory. Be careful! No thx! With love from Russia!
Chosen Solution so i just reset my phone and i just finished however as it was turning on it just gets stuck on the apple logo and i tried hard reset and everything, i tried plugging it in my laptop trying to factory reset but the phone wouldnt even pop up on my laptop so yeah any help. Try replugging the battery
Chosen Solution Need radio wiring diagram @jcarney04 , Jonathon , at the 1st link below click on it, look at the far right of page scroll and select your year of Taurus for wiring info. The other 2 links also have info. that may help. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. http://www.modifiedlife.com/2000-ford-ta… http://www.caraudiohelp.com/wiring_diagr… http://www.the12volt.com/installbay/vehi…
Chosen Solution replacement guide request for wireless card adapter Hi, Which wireless card do you mean, the WLAN or the WWAN? Here’s the hardware maintenance manual for the laptop, taken from this webpage (select 3rd page of results for guides at bottom of the list) Go to the bottom of p.64 to see the necessary pre-requisite step and then the procedure to remove/replace the WLAN card. Go to the bottom of p....
Chosen Solution So I have a Toshiba Satellite C55t-A5123 The laptop didn’t want to turn on one day. I’ve noticed a few things, A.) Does not turn on any LED showing that it’s charging or has power, power button doesn’t light up. B.) I don’t think the battery was dead before this but it may be. C.) The charger does not get warm like normal when plugged in. D.) I’ve done all the simple stuff like taking out CMOS battery and waiting, holding button, charger only, the battery only, etc etc....
Chosen Solution My battery doesn’t seem to be charging. I think it is plugged into the charger properly, what else could I do? My fitbit is not charging. If your charging cable is securely plugged into your device and it is still not charging, the USB port may be faulty. Test your computer’s USB port by inserting a different device into the port and checking it if is functioning. If the port is faulty, plug your charger into a different port or a different computer....
Chosen Solution Front camera will not work after replacing screen . It could be either the front camera flex cable isn’t properly connected. It could also have been damaged during the repair. Try reconnecting it first, if not, replace it.
