Posts

Chosen Solution Hi, my speaker does not turn on, when it is plugged to the AC I’m able to see the battery light but it won’t turn on with or without be plugged to the power adapter. I already updated its firmware but it did not work. Please help !! I just had this problem. Did some searching and came across this: update.bose.com/soundlinkcolor to update my SoundLink’s software. If that doesn’t work (or if your unit’s software is up to date), do the following:...

Chosen Solution Wolf ex-150 moped sport edilion started driving up the road at 55 miles an hour and then I lost all momentum and it went to a dead stop and now I cannot get it to move at all the engine starts up just fine but I can’t get any movement from it the RPMs still go up Check the belt sounds like it broke

Chosen Solution My phone fell when I went to the store yesterday and landed on the screen. I have a screen guard on so the screen didn’t get damaged. But the phone went off when it fell and won’t turn on since. At first I thought the battery might be drained but when I tried charging it, the charging light didn’t even come on. I’ve even tried doing a soft reset and nothing worked....

Chosen Solution I am pressing the Wi-Fi button, but am I am having trouble connecting to the internet. None of my internet applications are working and I can not upload my photos. There are a couple of different reasons that your camera isn’t connected to the Wi-Fi, as described in our troubleshooting guide. You should make sure that you are within a reasonable distance of the router, as the camera will not connect if it can not find a strong signal....

Chosen Solution I have replaced the battery, plugged the adapter into the wall to charge and tried plugging it in to the computer. The battery will not charge while it is in the camera, the camera will not turn on. I actually had to have the switch in my replaced by sending it out for repair due to warranty. But you could do it yourself if you have the part and the skills to do so....

Chosen Solution wifi connect but next stop Hoi Nandan Raj, A late response here, but your issue could have used some more information. Unfortunately, BlackBerry has since ended support for all mobile devices and has shutdown all servers related to those devices, including the BlackBerry Classic. If your issue, was trying to set-up your BlackBerry Classic and are not able to pass the Wi-Fi screen, this is due to the server shutdown and your device will not be able to properly set-up due to that....

Chosen Solution My gear neo will not connect to the bluetooth on my s4 unless it is literally touching. Is this an antenna problem and if so where can I find one? Sebastin Basic step is Android 4.3 (Jelly Bean) + Galaxy S4 ( key requirement for Gear 2 Neo ). ( you can check compatibility at Samsung Site : https://news.samsung.com/global/samsung-… ) first of all, you need to have both Bluetooth as well as NFC activated on the Device....

Chosen Solution My MacBook Pro has a bad battery connector possibly. Thats what I initially suspected and hoped for. Or, it could be bad I/O board or bad logic board. It was working fine when I shut it off one day. I came back some days later and it just wouldn’t power on again. It has a newer battery and charging cord. The thing lights up when I attach the cord....

Chosen Solution Hi guys, I have a Apple MacBook Pro “Core i5” 2.5 13" Mid-2012 The problem with it is it won’t turn on or off by the power button. Symptoms are: It will only come on if I disconnect the battery and adapter and hold down the power button for a few seconds reconnect the battery and plug in the adapter, then it will start automatically.It will start if you then restart it....

Chosen Solution I am wondering what is wrong with my Sega Game Gear and if it would work with a new screen and capacitors. Looking at the pictures the only thing wrong with it is the picture has bars in it and some of the parts in the lower right and left corners have some brown stuff on them. Also one of the pictures shows a exposed wire and I am wondering if this has caused damage or if I just need to add some tape on it....

Chosen Solution My homelite cordless shear ut44174 won’t charge, what can I do? @sfeste you want to make sure that you check the charger first. Use a multimeter and test the output at the connector. You should show something like 7.2v and 4.8v. If it works that you could have problems with the connector or depleted batteries. Those will most likely have to be replaced. Either way, you’ll have to open up the unit to take a good look at it....

Chosen Solution I just tried to turn my G3 Vigor on and nothing happened. What should I do if it won’t turn on? Make sure that the phone is charged. It won’t turn on when the battery is uncharged, so you need to plug the phone and charge it and see what would happen. Loose the phone, Heat the board with solding paste( flux) Let it get cool and jail the phone back....

Chosen Solution I found this and i wanted to turn it on but it won’t charge or anything when it was charging I put it up to my ear and I hear a buzzing noise. Hi, After all this time the battery will have become depleted beyond recovery and will need to be replaced. If you replace the battery and get it to turn on then it will not work as a phone anymore in most places as it is a 2G only phone and this mobile phone system has been shut down most everywhere, replaced by 3G, 4G and now 5G options If you still want to go ahead then here are the two battery model options that were used: BMC-3 or BLC-2 (supplier example only - just search for the battery model number to find other suppliers) Here’s the page from the user manual that shows how to access the battery to check which type of battery is installed....

Chosen Solution two things happened around the same time. the table the iMac fell over but physically the imac looked ok. The other was an update went through that caused a restart. I think its more of a software issue because if I run the wifi diagnostics it turns the wifi back on, if i restart the computer the wifi is on. If i walk away from the mac and come back after a while (not sure the time frame) but the wifi will be turned off....

Chosen Solution So I recently Bought a new iphone 6s screen to replace my broken one but i am wondering if it is mandatory to switch over the components from the old screen to the new one in order for the new one to turn on or work? no, everything will work fine, with the exception of the Touch ID. if your new screen came with a home button, it will work as a home button only....

Chosen Solution Hi, I have an iPhone 6 here. The microphone on the charging flex doesn’t work. I tried a few new charging flexes, made no difference. The microphone still doesn’t work. So I ruled out the possibility of faulty charging flex. Now it seems the only possibility is the Audio codec IC chip (U0900). I successfully removed the audio chip, before reballing the chip, I tested the phone see if it is working, however I found the phone won’t turn on at all!...

Chosen Solution Why won’t my charger hold a charge for more than 1 1/2 hour to 2 hours max jvldvs does not sound like a charger issue but a battery issue. Replacing the battery should resolve this.

Chosen Solution I have the Epson workforce 840, I can print no problems, I can scan with no problems if I start the scan with Epson scan icon on my desktop, however if I try and start the scan from the printer using the scan button on the touch screen, then touch “scan to PC (PDF)”, it gives me two choices: “USB connection” or “last used” If I use “last used” as this is wireless the printer gives me an error “Communication error make sure the computer is connected than try again” I have reinstalled all drivers and Epson scan, I have reset the printer itself to factory settings, reinstalled all drivers and software but same problem....

Chosen Solution My washer will wash and agitate just fine but when goes to the spin cycle, it tries to spin but it turns about 2 inches and looks like it is getting caught up, then it tries to go the other way and the same thing happrns. Keeps going right then left… I was thinking the barring went bad, but I can free spin it just fine and it doesn’t make any noise....

Chosen Solution I recently replaced the LCD screen and after putting it back together it doesn’t turn on when the battery is connected. When i disconnect the battery cable the screen lights up and the battery icon shows up. When i plug it back in the LED light flashes three times and nothing happens. Is this whilst plugged into a power source? Was the battery disconnected before the repair? Same problem....