Chosen Solution my Xbox chirps and then turns off fan does a quarter spin and then shuts off again I have disassembled it and cleaned the motherboard the ports are all fine power supply is brand new https://yoodley.com/xbox-one-wont-turn-o…
Chosen Solution 2003 club car 48 volt parkway, year old batteries, lights, wiper etc all work fine, cart operated fully normally speed wise. I have a long driveway, going up, fairly steep in some sections. when i head up, it goes beautifully all the way to the top, no bogging down at all. however if i stop on the steep section, it will not go forward again, pedal to metal just sits there, after say 5 or 10 seconds of the pedal down, i hear a click and it rolls backwards....
Chosen Solution My screen cracked on my 6 plus so I changed it and all went well till I turned it on and my camera did not work so I opened it again and after I closed it, it did not turn on but when I plug it to the computer it says I need to put my passcode in and when I get a call it vibrates so I’m not sure what there is to do...
Chosen Solution I keep missing my phone calls! Every time my phone rings, I can’t hear it because the ringer is down. How do I fix it? One of these should help. Sound Settings ¶ If the ringtone will not sound, press the circular menu button to access the main menu. Under sound settings you can adjust the ringer volume. You can also adjust the ringer volume using the volume buttons on the side of the phone....
Chosen Solution Hello! I removed the Wi-Fi antenna located at the top right, next to the rear camera, and when doing a test I am still able to connect to Wi-Fi. Are there 2 Wi-Fi antenna in the iPhone 8 Plus? Or it the antenna at the top right only a GPS antenna maybe? Thank you! Edit : Added images and also where I found the guide https://www.sosav.com/guides/mobiles/iph… Because that is not the wifi antenna, that’s the UAT tuner, you damage LTE diversity and GPS if you remove that part....
Chosen Solution Recently I had my housing changed, so I don’t know if it affects it but it’s not as good as original quality because I bent my previous one on accident. But the wifi was fine until I dropped it from my pocket onto the ground in sitting position, then the wifi stopped functioning normally. Now the wifi strength is so weak I have to be close to the wifi modem to use it and it will also not receive the best strength....
Chosen Solution I have a 15inch Macbook Pro, model A1211. I plan on buying a new display data cable for it. I want to make sure it will fix my problem. my macbook pro’s screen is in good condition, no cracks or scratches, but the colors are distorted. if i plug in an external monitor, it works fine. I just want to confirm the display data cable is the correct part I need....
Chosen Solution Thought I had lost my watch so I unpaired it. Found watch but isn’t totally disconnected and I can’t get my phone and watch to pair up. Connect the watch to the charger, then hold the power button until the power off screen comes up. Force touch and click erase. Or go to settings general reset
Chosen Solution The phone had minor water damage but it worked after suffering that. Died recently and now wont charge or turn on. Tried a different battery and scrubbed the phone with isopropyl alcohol and still nothing. With one battery it wont do anything, with the original it does the thermometer thing and with a THIRD it just power cycles. Please help, this phone is a good friend of mine and he just wants the photos off of it....
Chosen Solution Hello! Thank you for reading. I have a 2009 A1181, 150 GB Toshiba HDD that is working, I previously installed Windows on it. I have attempted to install 10.8 through Hackintosh, it got about halfway when it told me that Installation could not finish, with an error code. The disc itself though still works. I made a 10.6.3 USB with Apple media on it, and it goes through loading for 5 minutes or so, then gives me the X in the circle....
Chosen Solution Hello iFixit fellas. I’m reaching you because i have an issue with One of my Xbox One Controller. A button won’t work. Things i’ve done : Teared the entire controller apart. Cleaned the rubberised contact pad, making sure not to scrub to hard underneeth to avoid removing the graphite coating (which makes contact with the PCB.) With Q-tips and isopropyl alcool. Cleaned up the PCB lightly scrubing with a toothbrush and alcool....
Chosen Solution How do I open the z20t? what size of M.2 SSD can I upgrade to? Is it half height or full height? Any special instructions on how not to break the device while opening it? Voici lien utile : https://www.youtube.com/watch?v=KdY6p-9u… Cordialement.
Chosen Solution I press all the right buttons to set the time, but once I press “start” it emits a lower pitch beep and won’t start. The timer won’t count down, the heat won’t turn on, nothing happens. I don’t know how handy you are around electrical appliances, but just about every single time my microwave has quit working on me it’s been because of the @#$%^ door switches. For some reason those things seem to fail all the time....
Chosen Solution My Furby responds to tickle, petting and feeding and light from a flashlight. He will not sing Twinkle Twinkle no matter what. I have watched several YouTube and tried to be very careful with clapping and petting. Replaced batteries. He wont sing. model 70-800 Hold Furby upside-down and tickle him until he cries and says ‘Down down!’ Then put Furby right-side-up again. Cover Furbys eyes three times, then pet his back....
Chosen Solution Craftsman yt 4000 with B/S 24 horse has always been hard to start, now won’t start without starting fluid. It then fires right up and runs great. Check your fuel lines, make sure there are no kinks, might need to clean the carb. Check your spark plug and wire as well. Make sure you’re getting good spark.
Chosen Solution Hi My laptop has a problem in that XP detects a graphics card problem after short running time and disables the installed graphics card, can it be repalced or is there another problem. re-instralling driver makes no difference. graphics card is a nvidia Geforce 8600M GS Nvidia has had a lot of problems with the 8600 mobile graphic processors. Apple and Dell both have extended their warranty on affected laptops....
Chosen Solution Computer won’t start when pressing Start button. Could be a number of things battery ram power supply you need to provide more info for me to be able to help you A bad, failing, or inadequate power supply often causes this issue. If the hard drive is not getting enough power during the first time the computer starts, it cannot spin the hard drive platters fast enough to start the computer....
Chosen Solution My I phone 6 fell in water and never turned on again how ever I took the SIM card out and want to put it in the new IPhone 6 I got but don’t know if it will damage my new phone in a way .. also will all my pictures transfer to my new phone if I put the old SIM card in ? All of your pictures are stored on the iPhone’s logic board and you cannot retrieve pictures via the Sim card unfortunately....
Chosen Solution yay another new issue with this computer. I was trying to update my laptop, and I got an update error which is really confusing. I put this error code into google and it said that there were files missing or deleted. I clicked on a blog and followed some instructions to try get this issue resolved. the first step was to run some (dsim) checker and I did. everything was normal....
Chosen Solution I just replaced the motherboard in my HP Pavilion dv7-7000. I got instructions on how to DMI the board but the Ghost program keeps stalling so I can’t get the thumb drive created to boot disk. Does anyone have anyone have any suggestions. I just did a rebuild myself, still have dead hinges; try hp’s bios recovery utility with a flash drive ? I’ll think on this
