Chosen Solution i bought my xbox 360 slim about a year ago i played it for about a month or 2 and then it kept turning off. I put up with it turning off of a couple of weeks and then the power cord blew up so i didn’t play it for a few months and then i bought a new power cord but it still turns off every now and then so i pulled the exterior off and played it for awhile but it didn’t help....
Chosen Solution I turn on my Mac Pro 2.1 2007 and everything turns on (fan, LEDs) but it gets stuck at a black screen. I’ve replaced hard drives, the motherboard, and the processor but nothing seems to work, what’s wrong? Probable video card issue. First reseat the card. Next try another card.
Chosen Solution The camera turns on but does not display anything on the LCD screen. Check and see if its power saving feature is enabled. You can test this by pressing the button to see if anything reacts. If nothing happens, try turning on the camera again with the power button. While it may be elementary, check and see if your batteries are fully charged and are the right type. When it comes to cameras, they’re usually picky about batteries....
Chosen Solution My I phone 6 has been putt away since i brought a 7 and i want to get it back out, i have tried charging it for ridiculous hours and plugging it into my computer but i still cant get it to turn on. When i plug it in the screen brings up the low battery logo, it then brings up the apple logo and turns off again. If you have the lights off you can see the phone tries to turn on a glows a navy type colour....
Chosen Solution I have a 1633 that I would like to replace with a 1688. I was just wondering if there would be any complications. Zelkalna , Logic boards are to be compatible. To see the difference of a1633-and-a1688 models click on link below. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. http://roonby.com/2015/12/12/iphone-6s-m…
Chosen Solution Hi I’ve just replaced an SP3 screen. I’ve done a number before without issues. Prior to replacement the screen was cracked and the display froze on the surface boot logo. Sort of as if the bios were engaging but couldn’t find the drive to load up the OS. prior to removing the screen I waited until the battery was dead and then went ahead. the screen came off relatively easily, no trauma to any cables apart from the digitiser, which was dead anyway....
Chosen Solution all the orange lights are on and flashing, my camera wont flash when i try to take photos, the red light is blinking, and I’ve put in new batteries and a new film nothing’s working pls help!!!!! I just got new batteries which made it work
Chosen Solution I am trying to power on my laptop and I know that it is fully charged, why won’t it turn on? There are many possible reasons for this issue. One possibility is since the power button is both an unusual design and on the side of the laptop, is that it has become stuck. Try and see if the button is visibly stuck, or cannot be pushed in all the way....
Chosen Solution I have an iPhone 6 that had a bad lightning charger port. I replaced with ease and the phone is starting up and functioning fine, but will no longer register a charger and charge. What do I need to check on my repair?? Pretty straight forward and easy repair. The problem is probably the replacement charge port. I noticed the majority of the aftermarket charge ports for iPhones have crappy soldering jobs and usually have problems....
Chosen Solution it takes a hour to boot up and when it does it has very bad frames it also can’t run games and takes 3 min to load a google tab. Hi @jadenj , How much ram is installed in the laptop? If the OS is Win 10 try starting the laptop in safe mode and check if it starts up OK. If it does then there is a driver problem....
Chosen Solution My Samsung pn60e530a3fxza will not turn on? If I hit power button on off a couple times (sometimes ) it comes on. I visually checked the capacitors, Not bulged or leaking. Not sure which board to start with. Any help would be appreciated Thanks The close up of the power board the discoloration does that mean it’s burnt?? @sparkiee dtasrt with the power board. You will have a few connectors on that board and there will be a chart printed on the board with the voltages supplied by the board....
Chosen Solution Hi Guys, the phone decided one day last month to not turn on. at the time i didn’t realize that the battery did not charge ether. after i googled the problem and followed most of the “fixes” (which didn’t work) i checked the battery and it was pretty much dead. i charged the battery in another phone and put it into the S4. the phone still did not turn on, but the battery picture came up on screen....
Chosen Solution How do I convert RAW drives back to NTFS without losing data. Windows 10 repair options during reboot can’t fix. Only access is through the comand prompt. Have not tried diskpart option to convert to NTFS because of worry that I will lose data. All three partioned drives have all been converted to RAW format! If I am not wrong, RAW format on Windows means that is part of a Software Array or Dynamic Disk Array....
Chosen Solution I had to replace the pod holder but now it won’t brew carafes. The display screen won’t give me that option. It worked perfectly before the first pod holder broke. What changed? I’m trying to do a reset now…again. didn’t help before. I fixed it. I did a hard reset and it’s been working perfectly.
Chosen Solution So, my Galaxy S4 is totally unresponsive. It won’t turn on or even charge. The backstory: The phone was working perfectly after a new battery. I tried resetting the phone using the volume-down-home-and-power-button method. However, I read incorrectly and held all 4 buttons down (power, volume up, volume down and home). Now the phone is just black; it won’t turn back on or do anything. The only thing it does do is show up as a recognized device on my PC....
Chosen Solution The led notification light is red, blinks 3 times and then repeats, ONLY when the charging cable is in! Anyone know how to help? Z5 dual guys my z5 had display but no backlight, I have bypassed the “V” and “A” both fuses still theres no backlight can anyone help? In my case, before it start to happens, the colume buttons seems not working very well. Then it worsen where I cant turn off my screen when pressing the power button, but it still detects the fingerprint....
Chosen Solution washer won’t turn on at all washer sat in storage 5 yrs. Kenmore catalyst model#11020094993 If your Kenmore 110 Series Washing Machine refuses to turn on, see the Kenmore 110 Series Washing Machine Won’t Turn On problem page for possible causes and solutions. Well first off is their power at the outlet, if yes then put the timer in the wash cycle mode, now when you pull the knob out or in depending on the model it should start filling with water no matter if the lid is up or down, if there’s no sound or water going in then I would suspect it’s either the timer on off switch, or the more easier power cord interruption, which I mean if it was stored I’d have to assume that a rodent might have been feeding on your electric wires inside the machine, this would be the first thing I’d chk, it’s the most invasive way to find out what’s wrong, then I would have to look at the timer, unless this washer has an inline fuse(very doubtful)....
Chosen Solution It will turn on but won’t move past the Acer logo screen. Ive done a factory reset and it still won’t move past the Acer Logo Screen. click power buttom + vol dow https://www.youtube.com/watch?v=w6tmETIe…
Chosen Solution Using the iFixit website tutorial, I successfully installed a new battery in my iPhone 4s and the phone came back to life immediately with a battery charge of about 40%. When the battery charge decreased to 10% a few hours later, I plugged the phone into the charger to take the battery to 100%, but the battery will not charge at all. Is there a part in the phone that feeds the power from the outlet into the battery so it charges up?...
Chosen Solution When I press the on button nothing happens and there is nothing visibly wrong with the blender. What’s happening? It’s possible that the circuit board inside the blender is damaged and will need to be replaced. Check out the guide on how to replace the circuit board.
