Chosen Solution Hello. I have a dell 3520: 6GB ram, 1TB hard drive, intel i5. A few months ago I had to update my bios… The problem became after I did it: At the very moment I started having issues with my wifi like it drops when I close the lid, and whenever I wake up the computer after it would take a looooooong time to wifi to start working, and actually, drivers disc won’t detect the wifi card anymore....
Chosen Solution I’ve upgraded a 2009 iMac to Monterey and I’m not able to get my keyboard to pair. When I click pair, it appears to be waiting for my number to keyed into the keyboard, but it won’t display the number to enter until I hit return. This seems to be an issue with the A1016 not playing nicely with Monterey in general. I found a solution to this from What_is_a_sesame on an Apple discussions thread....
Chosen Solution Dear IFixIt community After replacing my LCD my one plus 3 wont boot. When I plug it into the wall, it does charge and the LCD powers on with the battery charging icon. Vibration working and everything. But when pressing the power button, it won’t power on. Could this be a problem with the volume buttons & lock buttons failing? How do I check that it is that and not a faulty motherboard/daughterboard?...
Chosen Solution Currently have a Samsung UN55KU6300, but can’t seem to power it on. Trying to determine what seems to be the issue, but don’t know if its the power supply, main board, or the panel itself. I tried looking at at this (Blinking red light, doesnt turn on) reference to see if I could diagnose, but unfortunately the backlights don’t turn on even when I unplug the power supply from the mainboard....
Chosen Solution Good morning. I have a 2008 f150 4.6 v8 xlt. For the past 7 months, my truck randomly produces an error code. P2135 Thottle/Pedal Position Sensor/ Swith A/B Voltage Correlation. The wrench lite comes on and the truck goes into limp mode. I can usually clear by a couple of methods: turning off the engine, disconnecting the battery, clearing the code, or clearing the computer (PCM). This is usually a quick fix, but the problem keeps coming back....
Chosen Solution My Samsung ES95 camera will not charge! When plugged in the Red light doesn’t come on. It’s as if the charger doesn’t even fit it anymore! I’ve tried several different USB cables. Hi @freddie1957 Does it show that it is charging when you connect the camera to a computer’s USB port? If so then the charging adapter is faulty. If not, visually inspect the camera’s USB port using a magnifying glass and a strong light....
Chosen Solution My PS4 pro turns on for a couple of seconds then turns off. I unplugged the power cord without turning the ps4 off correctly. It won’t let me go on safe mode. I ahve had mine do this as well. I had to unplug the power cord and leave it unplugged. Try turning it on a few times without power by manually pushing the button. Then I waited like 30 minutes just to make sure all of the residual power had drained then I plugged it back in and it booted up just fine....
Chosen Solution My Kindle fire’s WIFI detection stopped working after months of working OK. I have not changed my home router or settings since installation. My wife also has same model Kindle Fire and it continues to work fine. I have tried resetting to factory defaults numerous times with no success. I have even placed the kindle alongside the wireless router with no success. I have more than enough unused wireless openings to accommidate this and other devices....
Chosen Solution Hello every one, About a week ago I accidentally dropped my galaxy s7, although there were no visible damage to front and back but just after that I realized that my wifi range has become very weak. I’m able to connect to my router if I stay close to it, but as soon as I starts moving away signal drops dramatically. This was not the case before my phone was dropped....
Chosen Solution If I switch to a used ps3 harddrive and there is downloaded games on it, will i be able to access and play them? Most likely not. If it is the exact same model of PS3 you might. It will probably prompt you to do an OS reinstall when you install the new HDD. I’m not 100% certain of this, so I could be wrong. Good luck!
Chosen Solution Was in the middle of down loading a game came back and the screen is black will not turn on nothing. Samsung phones like to throw tantrums. First, plug the phone into a wall charger, not a PC, hold down power for at least 30 seconds. If it didn’t turn on: Plug it into a wall charger for 8 hours, then try turning it on with it still plugged in....
Chosen Solution I am giving my old iphone away. The sim card has been removed. Do I need that for the phone to charge or start? The phone will not charge or start You don’t need the sim installed for your phone to boot or charge. If it was working before you stored it a new battery should be all it needs.
Chosen Solution I took the iPhone 5s apart to clean some fluff from the rear camera but after reassembling it won’t turn on. When I took it apart the first time it was stuck then suddenly opened and the home button flex cable connector and metal clip came off but it didn’t look damaged. I’ve since replaced the home button and flex cable but it’s still not turning on. Any suggestions ?...
Chosen Solution Started to blackout after hour. Than after half our. Than after boot. Screen black, run in background. Replaced hard drive, put it together starts to beep one at time continuisly. Took out lcd screen and boots normaly, no shutting itself off. Im tottaly confused Reseat your RAM to start with, but this also sounds identical to a failing power supply (check you diagnostic LEDs on the logic board.) If only #1 is lit, replace the power supply....
Chosen Solution I can plug my charger in and my lap top will work but my battery will not charge. Even if it is plugged in all day it will still register 0% charged. What can I do to fix this problem? Someone suggested it was the battery connector? Can this be replaced with out going to apple? Please advise Download this great app: CoconutBattery it will allow you to see what the status of your battery, MagSafe charger and the power logic on your system board....
Chosen Solution The Swiffer SweeperVac refuses to turn on. The most common reason for this happening is a dead battery. The battery must either be charged or replaced. If it is not the battery, the mechanism for turning on the device might be jammed. This mechanism is in the handle. To check this, try removing the handle entirely and examining the opening at the bottom while pressing the handle button. If it broken, there is little you can do, but is more likely to simply be stuck in which case pressing against the inner mechanism might free it up....
Chosen Solution After repairing the lightning port, I bottled my phone and the WiFi won’t turn on. The Bluetooth works, if I got to General > About, once I press on About, the phone glitches. i tryed resenting the phone and resetting the network settings. Still dosnt’t work. I NEED HELP!!! Take the board back out and inspect the WIFI / Bluetooth IC and surrounding components. It’s the one marked in orange....
Chosen Solution my hp laptop does not stop roaming it just shows HP & roams in a circle Hi Frank, I came across your post and would like to assist. The evidence indicates that this is an operating system issue as of now because this issue started after a Windows update. I recommend you to perform the following steps to isolate the issue and arrive at a fix: Power off the laptop....
Chosen Solution Goes to black screen with 0271 real time clock error - check date and time setting’s but won’t let me change them Hi, Try a power refresh and see if this resolves the problem. Turn off the laptop if on, and disconnect the charger if connected. Remove the main battery from the laptop. (see p.62 of the (hardware maintenance manual) Disconnect the RTC/CMOS coin cell battery from the motherboard....
Chosen Solution this system has been in storage for 12 years. i powered it up today. the red stand by light comes on, indicating system not on. when i press any of the disc or am/fm buttons, the display lights up indicating system on, but the goes back to system off mode in a few seconds. something i’m missing? Neither the user nor service manuals provide any particular clues based upon what you have described....
