Chosen Solution Is there anywhere that sells the narrow black wire that connects the wifi card? That would be the wifi antenna. You can sometimes find them on Ebay. There is one there right now that includes the wifi card for $60. There are probably members on ifixit that have them. I may have one of these in stock. You can contact me through my website if you would like to inquire about it....
Chosen Solution when i open a game eg. mc5 it thinks that i have connected a gamepad . which i havent ,can someone pls help me to fix this Hi Akindu In the security application, you have a setting option for games, you may have something to do. This application allows you to make adjustments so that the games work better. If you can not solve it in this way, you can restore the terminal and in this way the settings and the fault will be restored....
Chosen Solution I recently replaced my battery in a MacBook pro 15" 2011 model. I did so using ifixit instructions and battery. After 3-4 charge cycles, the battery will no longer charge. The macbook says battery not charging and the magsafe cable never turns amber. I have tried everything online such as unplugging power adapter and resetting the smc. What are the odds I have a bad battery? Have you tired reseting the SMC Plug the MacBook in and hold Shift+Control+Opinion+Power This may help
Chosen Solution I got home after a day out went to turn my playstation on and I got a white blinking light, I tried to use another controller and nothing I reset my wifi, my controller, hard reset my PS4, I even left it alone for a few days and nothing but my controller does connect to a different PS4 so it’s definetly my PS4 does anybody know what could be wrong with it?...
Chosen Solution When I plug my phone in it doesn’t recognize that it is charging or connected. Gus- If your phone is plugged in to charge but does not recognize a connection then the first thing I would do is test the chord. Either use your chord to try charging another device or use a different chord to charge your device. If your chord is working then my second suggestion would be to clean out the charging port with compressed air....
Chosen Solution I recently had the screen changed on my motorola z play and now the screen wont respond to touch. it responds to changing the volume but touching it does nothing. any ideas? @mrtherob2010 sounds like you either got a low quality assembly where the digitizer has failed, or the installation was not done properly. Take it back to whomever fixed it last and have them redo it.
Chosen Solution Turn on the switch and find that it won’t get past the logo boot screen. Tried putting it in maintenance mode but it didn’t work . Make sure it is charge. When a switch is dead u might be able to get it on logo screen but it will turn off
Chosen Solution the battery was completely empty. I put the ipod in the cradle but the ipod has not charged. It could be one of a few things: -Shot Connector (in iPod) -Shot Cradle -Power source that powers your cradle is not powerful enough Troubleshoot your problem by trying your iPod on a different power source, or a different iPod on your cradle. Good Luck! -Brendon
Chosen Solution I recently replaced the screen on my iPhone 5s. The screen is working fine now, but I just realized that no sound is coming through the speakers when I try to play music, watch videos, etc. The earpiece works when I call people, but there’s no audible sound. Any ideas? Put head phones in then out
Chosen Solution My WiFi on the Samsung Galaxy tab 3 10.1 GTP5210 will sometimes connect to a network (if at all) and then drop connectivity after a few moments. I’ve performed a hard reset, a factory reset, tried multiple networks. I am wondering if this might be a physical component I can replace for a WiFi antenna and if so any recommendations on doing so. My next step is to try a firmware update but I am not hopeful....
Chosen Solution If you look at the Flex cable and or a pic of one which is found on this ebay ad: http://tinyurl.com/y9k4nll or search on item number 150344196409 What kind of tape is used on the vertical sections of this flex cable? It is the three rectangular sections that have half rounded ends on each end of the tape. Is this electrically conductive tape? I ask because it looks like it is impregnated with copper for conductivity or is some sort of cork insulator....
Chosen Solution So about a month ago I broke my screen and about 2 weeks later I bought a screen to fix it. Once I put the screen on it wouldn’t turn on and I checked all the connectors and noticed the ribbon cable for the LCD was damaged. So i returned it and waited for the replacement to get back. Once the replacement got here I started putting everything back together but I accidentally ripped the home button ribbon cable connector....
Chosen Solution My laptops hard drive broke, so i replaced it with a new one but its still not working, when i switch it on, a little bar appears in the top right of the screen and just flashes. You’re problem is probably that it can’t find an operating system (Windows). Operating system’s are stored on the hard drive and new drives don’t come with one pre-installed. If you have a restore CD that came with the laptop, try putting it into the disk drive and then booting the laptop....
Chosen Solution I bought an Xbox one from a guy and when I got home it wouldn’t power up at all so I took it apart because the guy didn’t take care it and it was dirty. So once I put it back together, it came back on but only when using a controller. The power button on the console won’t power it up. What could be the issue? Either the RF board or the soft-button flex cable that attaches to the RF board is faulty....
Chosen Solution My Nikon D 5100 will not power up, even with a full battery. The green light in the back of the camera will blink once when I insert the battery but nothing else works. Any help? Could it be the power board. If so how do I access the power board? assuming you are using an official Nikon battery we will rule out that for now, though it may be worth trying an alternative battery to rule that out....
Chosen Solution My Nintendo DS Lite does not read the cards can I fix this? Hello Lane McIntosh, often the problem is simply due to dirty contacts. Try to clean the contacts in the card slot and those of the game itself with a cotton swab and some alcohol. Otherwise, there could be bent contacts in the card slot. Are all pins in the card slot straight and at the same height?...
Chosen Solution I use a 1tb external drive for my Macbook Pro. I got it as a gift and the hard drive isn’t detected no matter what I do. It’s a 250 gb Samsung SSD and it won’t detect it. I have tried a different drive and even a new flex cable but neither have worked. Can somebody help me out? Formatting! What system is your external drive and internal drive running?...
Chosen Solution My computer will not turn on. The charging light is on when its plugged in and the “on” light will flash once when you hit the power button, but it never comes on or acts like its going too. Any suggestions? disconnect the power cord, remove battery, hold power button down for about 30 seconds, reassemble everything, press power button report back with results When the blue light flashes once but doesn’t stay on, this is almost always a bad motherboard aka “Main Board”....
Chosen Solution ive noticed that the pins in my daughters ds lite are bent as she inserted the game in the wrong way. if i can take the console apart and straighten them then will the console work ok . I just fixed this problem on my daughter’s ds lite. The pins were not bent, but it was not reading any games. Spray a small amount of WD40 onto the game cartridge’s connectors....
Chosen Solution Device situation: The phone has a thin rubber case.It has had a few falls at around or less than 1m (3ft).The screen and rest of the phone are fine, no cracks, very few dentsIt went for a 3 second swim in the toilet (luckily just after cleaning and before using), I turned it off and placed it for 2 days in a bag of rice, which seems to have fixed it....
