Chosen Solution When the power button is clicked, the noise beeps like it is turning on and then followed by a high pitched screech and then it will turn off shortly after. the tv shows nothing other than a trouble shoot page and occasionally nothing, I’ve tried, plugging and unplugging, factory resets and nothing works ok so, i hate being the one to admit this… but this happened to me before, but i caused it....
Chosen Solution With a video input, I can see the array backlight move with the picture, but the LCD screen itself is black. Even on-screen menus don’t appear - the LCD is not functional. There are three boards in the signal path - the main board (BM1), the DPS board, and the Timing Control board. The fact that the backlight is active with video input suggests that the main board is fine, though the speakers don’t seem to work which suggests that it may not be....
Chosen Solution I am pressing on the on/off button, but nothing is happening. The battery may not be charged enough to turn on the camera. Take out and charge the battery for 5 or more minutes and then put the battery back into the camera. The battery may also not work anymore or won’t hold a charge, and in this case needs to be replaced.
Chosen Solution I charged it last night. When I took it off, the white light stayed on and would not turn off. I tried to reset it multiple times using the power and volume buttons in different combinations. I also tried to charge it again. It just does not want to turn off at all. What can I do? Is the white light the charging light or power indicator? If you take it apart,you can disconnect the battery and hold the power button for 15 seconds,then reconnect the battery....
Chosen Solution All of a sudden (after several months of use), it won’t charge when I put it on the charger. Keeps on saying “Critical - 0%.” What can I do besides put it on the charger? Don’t worry if your Fitbit Luxe is not charging. You should try the methods below: Use original charging cableIf you have not use it for several months then plug it on charger and check after 2 hours....
Chosen Solution Hello! I have a problem with a newly purchased set of joycons. They’re syncing in “handheld” mode and can be used but the switch body/system doesn’t recognize them when I attach them to the switch itself. How can this be fixed? Morning from Australia, Have you checked your connections within the device? Have you taken this device apart and reconnected the cable> Is it one side or is it both?...
Chosen Solution I have done all of the things suggested to figure out why my Wii won’t read discs, I have even replaced the lens with a brand new one… but it is still giving me the disc reading error. It does not make any unusual noises and the discs are spinning just fine. I even checked the region to make sure it wasn’t a compatability issue and have tried multiple discs....
Chosen Solution We recently purchased this model turntable specifically because it has the built-in headphone jack. However, regular headphones/earbuds won’t fit the jack. Do I need to buy an adapter or return it? @sharpmom teh Jensen JTA-230 uses a 3.5mm headphone jack which is pretty much standard for headphones. The question now is what size is the connector on your headphones/earbuds. Measure the diameter of your connector and let us know what it is....
Chosen Solution The top lights in the whirlpool refrigerator model WRF757SDHZ00 won’t work. Anyone know how to fix them? The other lights work when the doors switch’s are manually pushed. Hi @romas597 , Have you checked whether there is power getting to the lights - part #32 refrigerator liner parts diagram when the door is opened, you didn’t say. It could be just a faulty light module or a faulty power feed to the lights from the control board
Chosen Solution I have a Zte Blax X Max and I need just my glass replaced and I can’t find a video to do it. My digitizer is working just fine so I dont need to replace it. Can anyone please help me figure out how to just replace the front glass only? having the same issue . start by taking off the back but be careful of home button ribbon cable connected to the back cover next to camera....
Chosen Solution My DSi turns on but when you insert a game card it won’t read it. Can I repair it?? clean out the reader with a slightly damp paper towel and clean the cartridge the same way. check for any dirt or something the copper is on the back. When you put the cartridge in, push it in a little harder.
Chosen Solution Iphone XS 64GB. I was using my phone when it shut down. I assume I used it til the battery died. I put it on charger and it started bootlooping and giving me to need to charge display. Whenever I plugged in the charger the display would switch to show it was charging so it was registering the charger, left it alone a couple hours-nothing changed same dead battery icon....
Chosen Solution Why wont this work. The near middle of my galaxy screen will not respond. Leaving me to not type in numbers. I have to flip the screen in order to do so. And the power volume thing does not work. This is the best thing I have and I don’t want to throw it away now There is a fix for this. As there is a repair guide, you should be able to repair this issue, firstly, the touchscreen may be a bad connection to the motherboard, id advise you to first find a repair guide for the Galaxy TAB 4, secondly, once you feel confident, you then take off the back cover, find the touch/lcd connector, take the connector off, put it back on, if this doesn’t resolve your issue, then buy a new screen, put it on the frame....
Chosen Solution My Wii is a few years old and has decided to CoD (Click of Death) http://en.wikipedia.org/wiki/Click_of_de… any time ANY disk (GC or Wii) is inserted. it still spins. but won’t read. this did not happen suddenly. at first it would not read certain disks sometimes, then it wouldn’t read most disks sometimes, then it wouldn’t read any disk, and now, it wont read the disk and brings up the Wii’s BlSoD (Black Screen of Death)....
Chosen Solution Hi when i power on my laptop light blue screen comes says Recovery your pc needs to be repaired. Error code: 0xc000000f “File:\Windows\system32\winload.i can only go to BIOS.cant do anything else.please help.i was trying to install windows 8.1 through usb installation was completed and it stucked right before you choose background settings.i had to shut it down after that this error is coming. That means the boot configuration file....
Chosen Solution Wireless update not installing the new version it goes as far as 30% then it giving an error"update.zip is not correct. My phone is a blu studio x8 hd. Updating from blu_s530_v13 generic to blue_s530_v15 generic same problem , no answer on the internet ……
Chosen Solution My mixer is plugged into the wall but it still will not turn on and I can’t figure out why. I can slide the speed lever and press the quick burst button but nothing happens. If you can hear the power button clicking but the device will not turn on, it could be because of a faulty power cord or a bad connection somewhere in the device. To fix this issue, you will need to purchase a new power cord and install in on the device....
Chosen Solution I have two roomba 360s. One won’t hold a charge for more then a minute and then it dies, the other aon’t charge at all it says “charging error 3” . How do i fix both of these problems ? First, turn your Roomba upside down and clean the battery contacts on the base. Unplug the docking station and clean any dirt or debris off the contacts there too....
Chosen Solution Hello everyone! I come here after days of research on all threads that had a similar problem as mine. Here comes de deal: 3 days ago I replaced my MacBook keyboard because some keys were not working. The procedure (with the help of iFix’s it guide tyvm) went really smootly. I then reasambled all the parts and went to power on my macbook. Everything seemed fine and working, but then I noticed that the WiFi icon was greyed out and with a cross, I clicked on it and said “WiFi: No hardware installed”....
Chosen Solution I recently replaced the back housing on my iPhone 6 Plus. Everything works great but the Wifi and the Bluetooth. I have replaced the Wifi Antenna (and made sure the washer and all cables were connected). I also replaced the antenna that goes under logic board. Wifi is greyed out, bluetooth just spins. However, on the right side near the rear camera, I am missing the “Antenna clip” that is mentioned in the iFix it guide....
