Chosen Solution Can you tell me how to get my big trak to go in a straight line Is there any small rocks, debris etc in the tracks? Because the debris might slow down one of the tracks, therefore making the tracks unbalanced in power. do both drive wheels have the rubber intact? To me it sounds like one is missing. You could also have a motor that is a little lazy or debris on the magnet clutch in the gearbox....
Chosen Solution OL alert is on even though lid is closed & machine is not draining the water. This is my previous answer to the OL error light: First, OL stands for “Overload”, so in other words, the washer thinks the tub is too hard to move because it’s overloaded and the motor is struggling or the unit is way out of balance causing the washer to struggle. The most common problem is a nut below the inner tub that needs to “float”....
Chosen Solution I need to know where exactly the wifi chip/ic on my z30 motherboard is located. My wifi sometimes detects signals , sometimes not . If is detects signals , sometimes it connects sometimes not . I think a simple heating up the wifi chip might fix my problem. Please some 1 help me tx. Nav J, from what it looks like on the schematic the Wifi chip is U1000....
Chosen Solution I have not been able to connect to a network with xboxone I have already swapped out my wifi board per instructions from ifixit What Else could effect my wifi ? (Other devices have connected just fine to my home network, and hotel) Do other Wifi devices work nearby to the location of the Xbox? Could just be signal issue and you need to either get a new router or an extender....
Chosen Solution So a costumer bring me this iMac A1311 because the device don´t power on. We live in Varadero, Cuba, so the ambiental contamination of the sea its pretty destroying (the salt) rustting almost everything. I clean up the logic board and still wont power on. I need the boardview of the logic board : 820-2494-A, so I could continue to check the device. And if anyone have possible solutions…...
Chosen Solution Why won’t my computer recognise the camera to download photos. Have cord connected from camera to computer. Have tried connecting to both Mac and PC. Any assistance would be appreciated. Thanks. Your camera may not have the correct software to connect to your computer, i always use camera’s that come with a downloadable software setup so u can connect your phone to your computer even if u have the wrong software on the computer itself....
Chosen Solution When I plug it in the light comes on green automatically but it’s not charging Most likely a dead battery. Here you can submit a repair ticket: Support-Hover-1 Rideables Hope this helps!
Chosen Solution I have charged the device in multiple outlets, but it still won’t power on again–I am not sure if the device is even holding a charge. Any suggestions are appreciated! First, make sure that the Kindle Fire is charged. To check that it is charging, make sure the charger is plugged into your device correctly, and that the outlet you are using is providing electricity. (Try plugging in something else to the same outlet and making sure that it works....
Chosen Solution I had my psp on pause one day, then it froze. I had to turn it off, then when I tried to turn it back on, it turned right back off. I’ve tried recharging, still comes on, then turns right back off. When plugged in, does it run? If so, the battery might be nearing the end of its life cycle. Go grab a new one if it’s too old....
Chosen Solution Hi, I plugged my MacBook into a friends aftermarket power supply, and when i returned home there is no light when plugging it onto a real magsafe charger. Tried using a different charger, resetting SMC. Also if I plug the magsafe into a different mac and then into mine, the light is orange but slowly goes dimmer until it goes out, and doesn’t charge the mac. I was having that problem....
Chosen Solution Hi All, I have a Panasonic LUMIX DMC-TZ6 camera that won’t power up, I have tried 2 fully charged battery’s that work on another camera, taken it apart and cleaned with switch cleaner spray the on-off switch, and sprayed the camera/playback switch,and still no joy, so I presume a fuse has gone inside somewhere ? Anybody know the location of any fuses ? There is a battery under the top cover ML421 that’s reading 0....
Chosen Solution I have tried 10 USB cables 3 power blocks and two batteries but it just won’t charge!!! Have you tried to charge using a PC or laptop. I had a phone that would only charge on PC until I flashed phone Update (10/12/2016) Please reply for more help
Chosen Solution hi guys i have a problem with my xbox 360 s my console turn on correctly but no signal i dont know why … ? Assuming by signal you mean WiFi, this is how you’ll need to do it: Follow this guide to remove and replace the WiFi board, and then use this partto replace the faulty board. This will almost certainly fix your issue. Hope that helped, happy fixing!...
Chosen Solution I installed and played Forza Horizon 5 on the series x I got just last week, played it on and off and no issues anywhere. Then out of the blue the game crashed, no issue, I had plenty of games crash before. Xbox shut itself completely off and turns on but doesn’t give a signal to the TV. After letting sit for 10-15 minutes turned on it directs over to the Xbox update screen, stops updating at step 3 of 3 10%, and switches over to a troubleshoot screen....
Chosen Solution The top zoom control switch can zoom in but does not go back to the wide angle side prior to taking a shot. And it displays to turn off camera. Side zoom switch works most of the time. Camera is 1.5 years old, have not used much may be around 200 shots. Please advise if there is a solution for the zoom control switch. my top zoom has quit working less then five yrs old any way i can get this fix thank you mikey
Chosen Solution We bought a 55" vizio m55-c2 led tv a couple of years ago. Recently, sideways black t-shaped dark lines will randomly appear & stay. We can turn off the tv for a few seconds or minutes & the picture is fine. Randomly the bars come back - various timing. Any ideas what this could be & can it be fixed? The random appearance and “reset” fix suggest that this is heat related and is probably centered on the Tcon board....
Chosen Solution Earlier, I was using my phone to look through my apps, and decided to charge my phone because I was going to go be with family. When I was about to leave, I took my phone off the charger and noticed it wouldn’t turn on. I tried to hold the power button to see if it shut down on its own, or something of the sort. When it didn’t, I tried to charge it....
Chosen Solution Why won’t my S22 connect with my projector? My old Note 8 had no issues Hi @marsattacks What is the make and model number of the projector? You should be able to use a USB-C to HDMI cable (supplier example only) if your projector has a HDMI input
Chosen Solution Hi, i recently updated my ipad air to ios 9.1 i think and now i have a greyed out wifi button and no bluetooth, i have find my iphone turned on so i cant restore it because it needs a wifi signal to turn off find my iphone, any ideas?? I gave same problems, please help me, I have an iPad Air 2 on iOS 9.3.5 I have a iPad Air 2 and same thing happened....
Chosen Solution Long story short, my baseband would not be read so i couldn’t activate or connect to the network. Decided to try today to reflow U2_RF (baseband PMU). Removed EMI shield, heated it a bunch and put everything back except soldering the EMI shield; just put it in place. Now it will not turn on at all. Is it because of PMU or something else? Actually I do not know but my iPhone 5s dropped in water and it was working fine for like 1 month, but recently I got no service and Stuck on searching problem....
