Posts

Chosen Solution Periodically, my iPhone 5s will lose its connection to Wifi. When I go into Settings, it recognizes my Wifi network, and is trying to automatically connect to it (because it is a known network). However, underneath the network name the phone displays “No Internet Connection”, and will never connect. After rebooting, the phone will connect to Wifi when I unlock the phone and go back to the wifi menu in settings (It will display LTE until I physically go into the wifi menu), but the process will start all over again after a while (e....

Chosen Solution So my parents recently got a nighthawk wifi six router (I believe the RAX200). For the most part it runs fine, but randomly the signal will drop. I’ve already tried updating the firmware, and I’ve already reset it once. They all resolve the issue for a a while, but it does comeback every now and then. It doesn’t happen that often, but since my parents are using it for their business, they don’t want to risk it dropping during work hours....

Chosen Solution Hello, I hadn’t used my Wii in a couple of years. My Wii is unmodded. Plugged it in and the Wii turned on for a moment - disc light flashed blue, then nothing except the red light on the power button. Now whenever I plug it in I get nothing except the red light on the power button. It won’t turn on. I noted that there are similar questions....

Chosen Solution My 32 year old KitchenAid Mixer Model K45SS (no WH at the end) will not start until I move the speed lever to at least 5 (that gets messy!). I can then move the lever back to the lower speeds and it will work fine. Replace the Speed Control. Here’s the part: KitchenAid Speed Control WPW10119326 This part fits model K45SS https://www.kitchenaidparts.com/PartDeta… Here’s a video on how to do it....

Chosen Solution The power button on my iPhone 4s is stuck or don’t work/broke. I have my old iPhone 4 and am wondering if i can take the button out of that and put it in the 4s to get it to work? I have all the proper tools for the job but i have yet to order any parts as i was hoping what i needed would be there in the 4....

Chosen Solution I have a surface Pro 4 that the touch does not work. I get the yellow caution with the ! in it. The troubleshooting tells me that the Touch firmware did not install due to an error. When I try and use a firmware update it tells me the firmware is already installed. So will replacing the screen fix my firmware detection issue and get the touch working?...

Chosen Solution tablet won’t charge or turn on try leaving it on charge for a day, try to charge with another charger. if after this it will not turn on, then bring it to the service. there is a problem in either the charging socket, or in the gland.

Chosen Solution Your camera won’t turn on and you do not know why. First, make sure you have the correct battery and that the battery is charged.Make sure the battery is secure in the slot and the latch is fully closed. Next, try plugging your camera into a power source (i.e., computer, wall outlet). Plugging it in should prompt the device to power up.If you are not sure if your charger is working, you can try plugging your charger into another device to see if that device can be charged by the charger....

Chosen Solution A few months ago I was using my laptop for art projects when suddenly it shutoff and hasn’t run since. I get no response from the power button. I know the battery is not the issue, as the computer stayed plugged up all the time up til that point. I really hope it’s not the hard drive, as I’d hate to think that I’ve lost all my art projects....

Chosen Solution I have a Samsung 55” UN55MU6300 4K Ultra HD Smart LED TV. Today I noticed the TV would not turn on and the standby light is off. The remote has batteries and is working. The outlet has power. I unplugged the TV, pressed power button for 30 seconds, plugged it back in and it still does not work. I tried to check the power board (L55S6 FHS BN44-00807A) but have no idea what I am doing....

Chosen Solution The battery recently drained and when I attempt to plug it in, it no longer recharges. Reseat the charging cable Unplug and check the connectors to make sure that no foreign objects or debris are present in the connector. If necessary clean out the connector. Then re-plug in the charging cable to ensure that it is properly seated. Try a different cable The charging cable could be bad. Try using a different charging cable....

Chosen Solution I have a Macbook Pro Mid 2009 13”. After I saw the “No hardware installed” I decided to buy and change the airport card. When I changed it I put everything back and the screen now don’t turn on. Is there a possibility that replacing the card damaged the screen? Most likely you pinched the cable or didn’t install the connector properly when you plugged it back into the logic board damaging it....

Chosen Solution hello, i’m Dan, i have a problem with my z3 compact’s wifi. I replaced the lcd and the back cover, and the wifi don’t work good… The signal at 2,4GHz is so bad and at 0 mb in download, with the 5GHz is a bit better but not enought. I don’t know where is the wifi antenna, and if i could touched it or broked it when i moved the motherboard or others....

Chosen Solution when i play a game on the wii, it makes all these clicking noises. Nothing has happened(“yet”) info would be great! thanks! The best way is to replace the spindle grip. We’ve seen people try bending it but just made it more worse where the game started slipping on the spindle or wouldn’t spin anymore due to too much pressure on the spindle. I’m pretty sure that the noise you’re hearing is just the optical drive reading the game disc....

Chosen Solution My Nintendo Wii U would not eject the game disc that was inside of it (Super Smash Bros. for Wii U). When I pressed the eject button, the disc drive would make a noise as if the disc was going to come out but the disc remained in the drive and would not come out.I opened up the Wii U and took the disc out of the disc drive....

Chosen Solution When I try to login to my account on my macbook - I enter my password and then it starts to load. It never stops loading. There’s a gray screen with a loading circle that just keeps going. However, I can login under guest perfectly fine and it takes me right in. I’ve tried a PRAM reset, a hardware test (D while booting) and it came back with no problems found), and even in safe mode it won’t login....

Chosen Solution My 3ds xl has been broken for 4-5 years now the problem started when it would randomly shut down. The intervals between shut offs got shorter and shorter until finally it wouldn’t turn on. What happens now when I try to power it on is the light turns blue and stays on and the screen remains black for a few seconds then there’s a pop noise from the 3ds and it shuts down again....

Chosen Solution So I hit my hip on my kitchen island and spilled a small amount on the keyboard. So I turned it off and put it in like a tent position and waited a little while then after that I turned it on it’s side and had a fan blowing on the keyboard on high all night. It’s working but it keeps glitching and the audio keeps going in and out and then the processing system is a lot slower than it was before so is there something wrong with the motherboard or the CPU or should I just take it to computer repair?...

Chosen Solution replaced cord and brushes will not come on now I have a Dyson DC77 animal + allergy upright vacuum. I assume the design of my vacuum is similar to the DC24. The DC77 is bigger and has added paper filters behind the “ball” wheels. I had the same problem with mine. A small lever switch inside the vacuum “ball,” which controls power to the beater brush, is turned on when you move the handle from the vertical position to any other position, and turns it off when you place the handle back in the vertical position....

Chosen Solution I can turn on the laptop and use the keyboard but every time I try to move the cursor around it still doesn’t move. Once in a while if i keep trying I may get a very slight movement. I had this problem too. Your touchpad is most likely partially disconnected inside the device. I fixed it easily by opening up the Chromebook and reconnecting the touchpad to the motherboard....