Chosen Solution I am having trouble finding a cheap digitizer and i can only find s4 active with just the digitizer and no screen. No the flex cables are different. The one on the regular is longer then the S4 active. The shape may also be incomparable as well, not to sure.
Chosen Solution will not charge or come on while connected Make sure it’s not the charger you are using or the usb cable. When it is plugged in press it up to your ear and see if you can hear a “buzzing noise” If you can hear the “Buzzing” you could have a “Dead” iPod If all else fails drop by the apple store for a diagnosis and come back and someone here should be able to help you with a DIY repair for a fraction of the cost apple would charge....
Chosen Solution I have an Xbox Series S and found a replacement SSD for the Series X. Would it be reasonable to put that into my Xbox, or should I buy a Seagate expansion card? Xbox Series X Replacement SSD (ifxit.com) Technically it should work as the only thing that is different is the storage space. microsoft usually will allow a new ssd in their new consoles. also for $200 i recommend not getting it on ifixit and but one from a place like newegg or microcenter....
Chosen Solution I have a 2002 Nissan Altima 2.5 & my problem is when I start my car in the morning it will start right up with NO PROBLEMS!!! Now when I get to my destination & turn it off most of the time it won’t start back up. If it won’t start I have to wait about 20 mins. & it will start with no problem!!! Can anyone tell me what going on to make that happen?...
Chosen Solution It keep saying that is not charging even though it is and it won’t turn on is fully black! What should I do? Love Story X Horror Story let us know how you do know that “even though it is”. It does not turn on and has a dark screen so for a proper troubleshooting I would at least start with a new battery. You need to let us know what exact model this is....
Chosen Solution To remove the battery, is a Y0 or a Y1 tripoint screwdriver required? In fact, I need to replace the DC-In board. So is it necessary to remove the battery first before removing the logic card? Thanks. Here’s the IFIXIT guide to get your DC-In Board: MacBook Pro 13" Unibody Mid 2009 DC-In Board Replacement No, you don’t need to remove the battery but it does give you a bit more room to swing the logic board out....
Chosen Solution When I plug my iPod into my (or any other) computer I get a message saying “Windows didn’t recognise the last device you connected.” I can still charge the iPod, and play any music that I already have on it, but cannot connect it to iTunes to sync any new stuff onto it. I have tried resetting the iPod, and putting into Disk Mode, but still get the same message when trying to connect....
Chosen Solution I have been repairing iPhones for almost two years now, This has never happened before, though. I was replacing an iPhone 8 Plus’s rear glass. Everything was going perfectly. but when I went to reinstall the Lightning Cables flex connector to the logic board, it wouldn’t stay in, and kept popping back out. Whats strange is, when I just plug the cable into the logic board (Without seating it in) It works fine....
Chosen Solution We have a panasonic tv TY-LA1001 ELE3 and we can turn it on and it works. However after about 3 minutes the screen will go black and the green light will flash. After about a minute the screen turns back on and we can resume watching. This happens continuously and we’ve tried resetting it multiple ways. Anything may help so please any suggestions are beneficial! Thank you! The model number you posted is for a replacement lamp for a DLP type of TV....
Chosen Solution So I had a Huawei P30 Pro come into the shop for the first time for a simple screen replacement. I replaced the screen and the device seemed to functioned perfectly only to find the power button would not respond and/or turn on or off the device. I know for a fact it was working before. Still with no solution a second P30 Pro came into our shop a week later for a screen replacement again....
Chosen Solution My phone a BLU life X3 just stopped working, what I mean is that it just stopped turning on even though it worked about a half an hour ago. My phone isn’t warranted and I don’ have the key to take the memory out and I don’t know how to take off the back and I don’t want to do a factory reset what should I do? should I get another one and use the key or should I just try to take out the back?...
Chosen Solution Hi everyone. This is my first post. I figured I’d come on here and see if anyone knew more than me about the S9. I fixed my girlfriend’s Galaxy S9 with parts from InjuredGadjets.com. I got a new display+frame, and a new battery since hers was shot, barely lasting an hour on a full charge. Ever since I fixed it a couple months ago, her Google Maps is unable to navigate due to a lack of a GPS signal....
Chosen Solution Hi I have a wifi board that has a broken connector, it’s a DWM-081 model, will a MICA2 model work the console model is WUP-010 Thanks Rick Dang, sorry to see such an old post.. But I am actually fixing a GamePad for a co-worker and found out his had the DWM-081 module in it. My MICA2 module is able to work perfectly, and my Gamepad has the same synch problems his was when his DWM081 is plugged up in....
Chosen Solution I replaced the display and home button would not respond.it was like it was always working. iPhone would not power down and when I opened it up and unhooked the cable the power was on.now it will not power up did I short out the logic board? Update (08/21/2019) i believe you are correct on short.it connects to iTunes with info about device just no display to see....
Chosen Solution I have a Vizio Elevate (P514a) sound bar. However it won’t come on. I’d like to get instructions on how to disassemble it Try a factory reset, this is done by holding down the Bluetooth button and the volume down buttons for about 5 seconds, when this is done the 5 lights will flash 3 times. All the lights flashing 3 times will show that the factory reset is done correctly....
Chosen Solution I tried to remove the broken screen from the phone 11 and I used the y000 that came with the new screen and it didn’t work 🙃 now I have 8 screws 100% busted 😅 and don’t now how to take them out Hi Your best bet here is probably to use a small dremel to make a small cut on each screw deep enough to get a flat head screwdriver in so you can turn them out If that doesn’t work you may have to drill them out but that is a last resort;-{ Hopefully this helps Any questions please ask Thanks:-)
Chosen Solution I have replaced the battery in the S7 because the screen was broke so while I was in there I went ahead and replaced batteries because my old one was not fast charging I thought it was a bad battery problem but it was not .. new battery in and fast charging option turned on.. original plug used . help! I would definitely recommend making sure you’re using a fast charging block that is OEM from Samsung....
Chosen Solution Hi, I have a customer who came to get an iPhone 6 wifi antenna replaced due to sudden drops and weak signal. I replaced it and then tested it and it worked fine on my router, but only when hooked up to 5ghz. When connected to 2.4ghz it looses signal at 5 meters (about 15ft I think?) I have never come across this issue before and I replaced the antenna with one that I know works....
Chosen Solution Hey, i was taking a look at a phone for someone who said it wont charge or turn on. When plugged in a lighting bolt in a circle appears but no battery percentage. i took apart the phone and disconnected the battery then plugged in the charger and same thing Lighting bolt in a circle with no battery percentage Does this mean the battery is the problem? The device in theory should boot without one while plugged in like a laptop....
Chosen Solution This MacBook Pro decided one day not to boot. No start up chime, screen doesn’t show any light. I have done SMC resets several times. The battery indicator on the side shows a full battery although the battery is showing signs of swelling. I get a green light on the magsafe connector. This is the MacBook Pro where there is a latch that removes the front 1/3 of the bottom panel to access the battery and hard drive....
