Posts

Chosen Solution I have a refurbished 2019 13” MacBook Air. It’s worked great until yesterday I went to turn it on. It took forever. So I went and cleaned it out, updated and all that good stuff and then it started working perfect again. But then whenever I would unplug it from the charger it would immediately shut off. Now it takes forever to turn back on if it does (still works great when it does finally turn on) last night I got it to chime with the Apple logo on screen twice but didn’t fully turn on and hadn’t turned on at all since....

Chosen Solution My door lock won’t customize, when I press the remote once or twice it will lock but no honk, just flashing lights. Help, I want the honk and ability to customize my locks.. NB; I have tried endlessly the key in the ignition and lock buttons sequence. Most likely you will have to get these encoded via a scan tool. It works that way with Audi’s and pretty sure it will do that with yours....

Chosen Solution I’m trying to turn on my tablet with its main turn on button, but it wont turn on. Why wont it turn on, and can I fix it to make it turn on? Your device may not be turning on because you might have too many apps open. This could also do with the battery; make sure it is fully charged, and if it is, you might have a faulty battery....

Chosen Solution i have an 1st generation iphone and it wont come on or charge and before this happened the phone got really hot and later on the screen turned pink Strange, with all these faults it seems likely to be the logic board

Chosen Solution Well here is the gist, I haven’t been able to turn on either the WiFi or the Bluetooth function on my G2. When I do try to turn them on, the icon shows its in the process of being turned on, but that’s it. It returns to the off position in a minute. This has been going on for about a week now, during which I’ve tried repeatedly to fix the problem (assuming it was a software issue) through LG PC Suite (by using the restore upgrade error option) and recently just doing a factory reset, but neither of the two worked....

Chosen Solution My wiimote does not appear on my screen after I plugged in a GC controller as player 1 while my wiimote was still connected. I have no clue how to fix it and I tried everything I could find on the Internet. Ok, so you’re back up and running? Sounds like you may need to replace the sensor bar soon.

Chosen Solution I’m having the same issue. My wires are intact and look perfectly fine but I still have no sound. I’m new to the blog. I came across the blog because I put my Sony speakers out and there was nothing really wrong with him it’s just the right earpiece went out @watkinsm it is either the plug or the connection on the driver (speaker). To test it use a multimeter and place it on ohm reading....

Chosen Solution I have a cracked surface laptop 3 and i would like to pull apart a surface laptop 1 and swap the screens? Are they the same. Thanks @beefman26 no they are not. different screen, different layout, different connector

Chosen Solution I recently spilt water on my Xbox’s fan on the top, and opened it up in order to allow everything to dry properly, disconnecting the components and inspecting them to ensure there was no water left behind. After reconnecting everything, the Xbox works but turns itself off after a few minutes due to ‘insufficient ventilation’. The fan sounds like it is running, and the Xbox is on a desktop with nothing covering it....

Chosen Solution I tried turning on my console by controller and it wouldn’t turn on. So i thought that was weird and so I pressed the button on the console. I press it and nothing happens. No flashing , beep, green light, fan spinning. The red light is solid. I took the ps3 apart and cleaned out all the dust and I put it back together and it still wont turn on....

Chosen Solution will not power on, is receiving power from battery You can reset the speaker on the JBL by holding down the Bluetooth and volume down buttons for 5 seconds. This works on the JBL Go and JBL Flip. To reset The JBL charge, hold the play pause and volume up buttons until you see the power button glowing. If this hasn’t resolved your issue, there might be a hardware issue with the speaker itself....

Chosen Solution I was attempting to fix an ipod 5th gen that had a broken screen as i had done the same with my iphone 5s. But after putting in the screen and powering it on, it was just gray with a few darker vertical lines running down it. After turning it off and reattaching the screen again, it won’t even light up, but my laptop is able to recognize it....

Chosen Solution Hi, i’ve been practicing doing screen replacements by taking the screen off and on again nothing went wrong the first tries the third time the wifi stopped working it’s just grey same with Bluetooth it just says it’s searching but wont connect anyone knows what I could have done wrong? and if so how I could fix it There are only two scenarios that would cause this to happen after a screen replacement....

Chosen Solution I know this is a long shot but I figure someone might know the answer. I have a 2014 Mac Mini and I would love to have it in the new 2018 space grey color. I can buy a 2018 Mac mini outer case online for $150. Will the guts (and I/O plate) of a 2014 Mac mini fit in the aluminum case of a 2018 Mac mini? Thanks!...

Chosen Solution phone will not pick up network… keeps searching both apple and telstra say its a hardware problem but will not fix because of non genuin battery and screen Baseband modem. This is a common fault in the 6/6plus if you have a hot air rework station you can reflow the modem bit this is short term solution. Proper solution is to reball the modem. This fault occurs because of the screw location to the case creating a pivot point

Chosen Solution Will not power up. Does not show up when plugged into computer. tried new batteries and taking them in and out a bunch of times to try and reset. no lights at all Ephiram Bosse time to take a closer look at it. you do want to check the battery connections to make sure that the battery provides power on the connector. After that you want to check the micro USB connectors on the motherboard to make assure all of that is connected/soldered....

Chosen Solution About two weeks ago I accidentally spilled soda on my MacBook Pro. I did what you supposed to do when that happens and turned off my MacBook and disconnected the battery and removed the logic board so I can clean my MacBook and let it dry. The logic board didn’t have any water damage on it. I waited about a week later and put everything back together, but when I power on my MacBook Pro it’ll stay on for about 30 minutes to an hour then it will force shut down on it’s own....

Chosen Solution My gameboy micro fell in to some water. I immediately pulled it out and dried it out. The next day, it would turn on and off but will no longer charge. What can I do to fix this? Hi, Drying it may not have been enough. The impurities in the water causes corrosion and provides circuit paths for the electricity which were not in the game console’s operating design and could damage the components....

Chosen Solution I do chromebook repairs for a school district and I have come across a couple hundred 100es that have a charge light, are fully charged (left on charger for 1 day or more), but don’t seem to turn on. I’ve verified that the battery and screen/topcase are working by testing them on other chromebooks. I’ve also plugged in an external display and the cbs are not sending any display signal....

Chosen Solution Hello, LG G3 won’t turn on, but led light is on. Any help? Thanks. @gytisifixit , Gytis, Press and hold the Power button for at least 10 seconds or longer. If still not powering up, go to the link below to see all the solutions/ways to fix LG G3 won’t turn on. Good luck. I hope this helped you out, if so let me know by pressing the helpful button....